top of page

Aqua Cast Water Activated Casting Compound

Aqua Cast eco resin is an environmentally friendly fusion of powder and polymer which only needs the addition of water to make beautiful homewares & more!

We have fused the acrylic polymer additives into one ground breaking powder to make this easy to use eco resin. All mechanical properties normally found in a traditional powder and polymer mixture remain the same, giving Aqua Cast excellent cured strength.

It couldn't be easier, simply add water, mix and pour.

The guide mix ratio is 100 : 35 (100parts powder to 35 parts water, or 2.8 : 1)

The user can change the water addition to create a lower or higher viscosity (runnier or thicker) to suit the individual application. 

Easily coloured with water based pigments such as our resi-TINT acrylic inks, acrylic paints or mica powders, e.g.

Features & Benefits

  • Environmentally friendly eco resin

  • Perfect for coasters, ornamental vases, planters, candle holders, soap dishes and detailed figurines

  • Easily pigmented using resi-TINT inks or other water based pigments

  • Ideal for ceramics & textured art pieces and can be partnered with our art resins when using a mould

  • Excellent reproduction of detail

  • Can be used to create terrazzo pieces

  • High surface hardness and strength

  • Smooth, impact resistant surface

  • Fire protection class 1 (surface spread of flame)

  • High degree of weather resistance for external applications when sealed

Aqua Cast Specifications Chart.

Mixing

Adding colour 
Use any water based pigment e.g. resi-TINT acrylic inks, acrylic paints,
 mica powders, e.g. Resi-TINT MAX Neon Powder. 

Any solid can be added, sand, mica, quartzite, dried shards of Aqua Cast etc.

Mixing the powder

The desired viscosity & consistency can be controlled to suit the application. Alterations to the guide powder to water ratio will affect the product performance, particularly in terms of drying time. Measure the desired amount of water, add the corresponding quantity of powder gradually during mixing. For example:

  • 100g powder to 35g/ml water

  • 150g powder to 52g/ml water

  • 200g powder to 70g/ml water

  • 300g powder to 105g/ml water

  • 500g powder to 175g/ml water

 

  • Use the handy online calculator tool on this page, all you need to know (or calculate) is the volume of your mould in grams or millilitres.

     

    Mix by hand or with an electric mixing blade for 2-4 minutes until uniform and smooth. Add pigments at the mixing stage to obtain the desired colour shade. The mixed solution will rapidly become creamy and lump free, tap the mixing container to help remove trapped air. 

    Application

    Immediately pour into your mould and allow to settle. Any residual bubbles can be popped by agitating or tapping the mould. Allow to harden for 60-90 minutes before demoulding (temperature and mix ratio dependent). Allow to dry for 24-48 hours to build cured strength.

Application

Immediately pour into your mould and allow to settle. Any residual bubbles can be popped by agitating or tapping the mould. Allow to harden for 60-90 minutes before demoulding (temperature and mix ratio dependent). Allow to dry for 24-48 hours to build cured strength.

Pouring guidelines for mixing art resin and Aqua Cast

When pouring Aqua Cast onto previously poured resin, please ensure the resin has entered the gel phase but is not yet touch dry to allow the aqua cast to adhere. This will vary depending upon depth and size of the mould. If you think you have missed the gel window, wait for the resin to dry, and thoroughly abrade to create a key before pouring Aqua Cast.

When pouring resin onto Aqua Cast the time between pours is not as important as the resin will adhere to most surfaces. Wait until it is visibly dry, normally 1-2 hours before pouring the resin. It is recommended to carry out the resin pour within 24 hours.

bottom of page